上海沥高科技有限公司

HOME > Products > Wind Energy
 

Leadpad

 

Leadpad is an uncured, non-silicone rubber pressure-equalizing sheets. The rubber pressure caul sheets is placed on the surface of the resin-base composite layer before the resin is cured in the molding process of the composite material,and is mainly used for transferring and distributing the pressure, so that the composite material is none of wrinkles, voids, delamination, deformation, bridging and so on, and can be used for blocking the overflow of the resin, and the use of the pressure-equalizing plate can greatly improve the quality of the product of the composite material, and at the same time effectively reduce the rework rate of the composite material component.

 

Leadpad-H

Leadpad-H and Leadpad-S are rubber pressure caul sheets specially designed for autoclave processing. Apply full vacuum throughout cure cycle and pressurize autoclave to 100 psi (7 bar), minimum recommended pressure is 45 psi (3 bar).Heat to 399°F (180°C) and hold for 2 hours, then cool to room temperature before removing vacuum and demolding from master mold.

Leadpad-H

 

Specifications

Colour

Black

Thickness/ in

0.063 (1.6 mm)

Width / in

39.37 (1000 mm)

Maximum Use Temperature/ ℉

401(205℃)

Specific gravity / (g/cm3)

1.19-1.20

Shelf life/month(packaging at23℃)

12

Physical property

Elongation at break/%

ASTM D412

400-430

Tensile strength/Mpa

ASTM D412

≥8.2

Hardness of Shore A

ASTM D2240

70

Shrinkage/%

GJB 5873-20006

≤0.5%

 

Leadpad-S

 

Specifications

Colour

Black

Thickness/ in

0.079 (2.0 mm)

Width / in

37.40(950 mm)

Maximum Use Temperature/ ℉

401(205℃)

Specific gravity / (g/cm3)

1.18-1.20

Shelf life/month(packaging at23℃)

12

Physical property

Elongation at break/%

ASTM D412

400-430

Tensile strength/Mpa

ASTM D412

≥8.2

Hardness of Shore A

ASTM D2240

70

Shrinkage/%

GJB 5873-20006

≤0.5%

Spiral wrap SW10-8

 

Specifications

Use Temperature

180(80)

Material

Polyethylene

Solid State

100%

Colour

White or Transparency

Type

3/8"OD - 3/10" ID (10mm OD - 8mm ID)

WF125

 

Specifications

Colour

White

Thickness /in

0.153.8mm

Width/in

601520mm

Weight/[g/m2]

125

Maximum Use Temperature/οF

400205℃)

 

Physical Properties

Air permeability/[mm/s]

GB/T 5453

2200

R85PA66

Specifications
Material
Nylon 66
Color
White with red tracer yarn
Width/in
4-70(100-1800mm)
Weight[g/㎡]
85
Maximum Use Temperature/οF
360(180℃)
Release agent
No
 

 

Physical Properties
Tensile Strength(MD)[N/2.0in]
GB/T 3923.1
≥1200
Tensile Strength(TD)[N/2.0in]
≥1000

LG150

Specifications
Colour
Black
Thickness/ in
0.12 (3 mm)
Width / in
0.47 (12 mm)
Maximum Use Temperature/ ℉
300 (150 ℃)
 
Physical property
Penetration / in
GB/T 4509
0.22-0.30 (5.5-7.5 mm)
Total: 57 Pages 1/12 Next  1  2   3   4   5  After 5 Page Last